Miscellaneous Features

As the infomercials always say, "But wait, there’s more!" If simultaneous Clojure and ClojureScript REPLs, interactive programming, code completion, stacktrace navigation, test running, and debugging weren’t enough for you, CIDER delivers several additional features.

Using a Scratchpad

CIDER provides a simple way to create a Clojure scratchpad via the M-x cider-scratch command. This is a great way to play around with some code without having to create source files or pollute the REPL buffer and is very similar to Emacs’s own *scratch* buffer.

Find References

The functionality is based on ideas from this article and was introduced in CIDER 0.22.

There are two ways to use find references in CIDER:

cider-xref-fn-refs (C-c C-? r) shows the usages of the function at point in a dedicated buffer
cider-xref-fn-refs-select (C-c C-? C-r) shows the usages in the minibuffer

Here’s how they look in action:

Keep in mind the following limitations:

This works only for Clojure
It’s powered by runtime state analysis, which means it will show only data for loaded namespaces (like most of CIDER’s functionality)
It doesn’t (currently) find usages in lambdas
It doesn’t give us the precise locations where something is used, we only know that it’s used

On the bright side:

It’s super fast
It doesn’t require any static code analysis
It’s still more reliable than grep

The functionality is not perfect, but at least it’s there if you need it. As a bonus you get a quick way to navigate to all of the functions used by some function using cider-xref-fn-deps (C-c C-? d) and cider-xref-fn-deps-select (C-c C-? C-d). Those are pretty handy if you don’t want to jump to the source of some function to see what functions it refers to (uses) internally.

Don’t forget you also have a couple of third-party alternative:

The much more sophisticated AST-powered "find usages" provided by clj-refactor.el
Projectile’s "grep in project" (projectile-grep, typically bound to C-c p g)

CIDER Selector

The cider-selector (C-c M-s) command allows you to quickly navigate to important buffers in the context of a Clojure project - e.g. the REPL, the stacktrace buffer, the doc buffer, the most recently visited Clojure file, etc. The usage of the command is extremely simple - after invoking it you need to type a single key identifying the target buffer (e.g. r for the REPL).

One thing to keep in mind about the default keybinding C-c M-s is that it’s available only in buffers where cider-mode is enabled (e.g. Clojure source buffers) and in the CIDER REPL. If you want to have it available everywhere it might be a good idea to add a global binding in your Emacs config:

(global-set-key (kbd "C-c s") #'cider-selector)

Here’s a list of all of cider-selector's keybindings:

Keyboard shortcut Description

Keyboard shortcut	Description
`c`	Most recently visited Clojure buffer.
`e`	Most recently visited Emacs Lisp buffer.
`r`	Current REPL buffer or most recently visited REPL buffer.
`m`	`nrepl-messages` buffer.
`x`	`cider-error` buffer.
`d`	`cider-doc` buffer.
`p`	`cider-profile` buffer.
`s`	`cider-scratch` buffer.
`q`	Abort.
`?`	Show help.

c

Most recently visited Clojure buffer.

e

Most recently visited Emacs Lisp buffer.

r

Current REPL buffer or most recently visited REPL buffer.

m

*nrepl-messages* buffer.

x

*cider-error* buffer.

d

*cider-doc* buffer.

p

*cider-profile* buffer.

s

*cider-scratch* buffer.

q

Abort.

?

Show help.

Any of those keys can be prefixed with a 4 to make the target buffer open in a different window (as opposed to the current one).

You can easily extend the selector with new commands using def-cider-selector-method:

(def-cider-selector-method ?z
  "CIDER foo buffer."
  cider-foo-buffer)

Browsing the Classpath

You can easily browse the items on your classpath with the command M-x cider-classpath.

Here you can see it in action:

Press RET on a classpath entry to navigate into it.

Browsing Namespaces

You can browse the contents of any loaded namespace with the command M-x cider-browse-ns. CIDER will prompt you for the namespace to browse.

You can also browse all available namespaces with M-x cider-browse-ns-all.

The UI contains buttons in the header which allow you to control how the buffer is displayed (see below for keybindings). You may also configure the cider-browse-ns-default-filters variable to a list of the element types you want to be hidden by default.

There are a bunch of useful keybindings that are defined in browser buffers.

Keyboard shortcut	Description
`d`	Display documentation for item at point.
`RET`	Browse ns or display documentation for item at point.
`s`	Go to definition for item at point.
`^`	Browse all namespaces.
`n`	Go to next line.
`h p`	Toggle visibility of private items.
`h t`	Toggle visibility of tests.
`h m`	Toggle visibility of macros.
`h f`	Toggle visibility of functions.
`h v`	Toggle visibility of vars.
`g t`	Group items by type (function, macro, var, etc.).
`g v`	Group items by visibility (public vs. private).
`p`	Go to previous line.

Keyboard shortcut

Description

d

Display documentation for item at point.

RET

Browse ns or display documentation for item at point.

s

Go to definition for item at point.

^

Browse all namespaces.

n

Go to next line.

h p

Toggle visibility of private items.

h t

Toggle visibility of tests.

h m

Toggle visibility of macros.

h f

Toggle visibility of functions.

h v

Toggle visibility of vars.

g t

Group items by type (function, macro, var, etc.).

g v

Group items by visibility (public vs. private).

p

Go to previous line.

Browsing the Clojure Spec Registry

If you are using Clojure 1.9 or newer you can browse the Clojure spec registry.

If you already know which spec you’re looking for, you can type M-x cider-browse-spec and CIDER will prompt you for a spec name and then drop you into the spec browser.

If you aren’t quite sure which spec you want, you can type M-x cider-browse-spec-all. CIDER will then prompt you for a regex and will filter out all the spec names that don’t match.

Once in the browser you can use your mouse or the keybindings below to navigate deeper.

Keyboard shortcut	Description
`RET`	Browse the spec at point.
`^`	Go up in the navigation stack.
`n`	Go to next spec.
`p`	Go to previous spec.
`e`	Generate an example for the current browser spec.

Keyboard shortcut

Description

RET

Browse the spec at point.

^

Go up in the navigation stack.

n

Go to next spec.

p

Go to previous spec.

e

Generate an example for the current browser spec.

If your project includes the org.clojure/test.check library, you can type e when browsing a spec to generate an example that meets the spec.

Clojure Spec Versions

Clojure Spec has a bit of a history and is available in a couple of flavours:

spec (aka clojure.spec, the original release, never shipped with Clojure)
spec-alpha (aka clojure.spec.alpha, the original release under a different name, ships with Clojure)
spec-alpha-2 (aka clojure.alpha.spec, the evolution, separate library, but still experimental)

Cider supports the whole mix, but with a twist.

When Cider shows a list of specs, the keys from all registries are shown. Registries are merged together from newest to oldest.
When Cider operates on a spec, like looking up a spec or generating data for it, the operation is tried against all registries, from newest to oldest, with the first successful operation winning.

Formatting Code with cljfmt

While CIDER has it’s own code formatting (indentation) engine, you can also use it together with cljfmt - that’s useful if you’re working on a team that uses different editors and IDEs.

CIDER provides several commands to interact with cljfmt:

cider-format-defun
cider-format-region
cider-format-buffer

Generally it’s a good idea to add some hook like this one to make sure on each save operation your buffers are properly formatted:

(add-hook 'before-save-hook 'cider-format-buffer t t)

Notice that you want to apply cljfmt prior to saving the buffer in question.

You can supply additional configuration to cljfmt via the configuration variable cider-format-code-options. Here’s an example:

;; Let's assume you want to pass the following config
;;
;;   {:indents {org.me/foo [[:inner 0]]}
;;    :alias-map {\"me\" \"org.me\"}}
;;
;; You'll need to encode it as an Emacs Lisp plist:

(setq cider-format-code-options
      '(("indents" (("org.me/foo" (("inner" 0)))))
        ("alias-map" (("me" "org.me")))))

CIDER doesn’t shell out to cljfmt - it interacts with it via nREPL (there’s format middleware in cider-nrepl), which is faster than shelling out.

Formatting EDN

Similarly to the cljfmt integration, CIDER also provides a convenient interface to format EDN using clojure.tools.reader.edn. The following commands are provided:

cider-format-edn-defun
cider-format-edn-region
cider-format-edn-buffer

Xref integration

Beginning with version 1.2.0, CIDER supports Emacs’s built-in xref functionality, which means M-. will invoke xref-find-definitions instead of CIDER’s own command cider-find-var. You can disable the use of CIDER’s xref backend like this:

(setq cider-use-xref nil)

You’ll have to disable and enable cider-mode for this setting to have effect.

If you use other packages that also integrate with xref (e.g. lsp-mode), you may wish to customize the precedence of CIDER’s xref backend. The precedence is controlled by the order in which backend functions appear in the xref-backend-functions hook. By default, the CIDER xref function will be added with a depth of -90, so it will (should?) come first. If you would prefer for it to have a lower precedence, you can change cider-xref-fn-depth:

(setq cider-xref-fn-depth 90)

See Setting Hooks for more information about depth.